Ma boutique
LUBA Mini — 1 disc • blades included
Original diameter — Available
Couldn't load pickup availability
Improve the mowing quality of your Mammotion LUBA Mini with the Turbine Disc V2, an anti-clogging cutting disc designed to limit grass accumulation under the deck and make mowing smoother, more consistent, and cleaner. Thanks to its directional airflow, it helps expel grass before it accumulates, even in difficult conditions.
The Turbine Disc V2 currently on the market maintains the original diameter of the LUBA Mini.
The redesigned fins of the Turbine Disc V2 generate an anti-clogging airflow that evacuates grass and limits fouling of the cutting deck. The result: your LUBA Mini robotic lawnmower works cleaner, with less grass accumulated around the blades and fasteners.
The disc ensures both rigidity, blade retention, and the creation of the anti-clogging airflow. The integrated deck cover protects screw heads from impacts and limits grass accumulation around the fasteners.
The Turbine Disc V2 for Mammotion LUBA Mini is compatible with Bosch Indego blades, known for their longer cutting edge and cleaner cut. You benefit from approximately +150% effective cutting edge compared to original blades (30 mm vs 12 mm).
Following the success of the V1 in 2025, this V2 version has been reinforced at key points: thickened fin base, heavily rounded corners, peripheral rib, and slightly recessed fin ends. The result: a more durable disc, more resistant to repeated stress, and better suited for regular use.
The Turbine Disc V2 is not just a simple replacement disc. It's an improvement designed to optimize the mowing of your Mammotion LUBA Mini robotic lawnmower: better grass evacuation, fewer clogs, better fastener protection, compatibility with more efficient blades.
It's the ideal solution for users looking for a more effective LUBA Mini cutting disc, cleaner in operation, and more durable over time.
TURBINE DISC V2
Designed specifically for the Mammotion LUBA Mini, this anti-clogging disc combines active ventilation, an integrated disc cover, and a reinforced structure to keep blades clearer, make cuts neater, and reduce maintenance. Its design also aims for quieter and more durable operation.
The airflow helps remove cut grass before it accumulates under the deck.
The disc cover limits grass build-up around the screws, reduces stress on screws and blades, and allows for quick blade changes without removing the deck cover.
On the version with blades, compatible Bosch blades offer an effective cutting edge of 30 mm, compared to 12 mm for original blades, for a cleaner cut and reduced wear.
3D printing relies on high-end machines, suitable materials, and a reinforced design.
ACTIVE VENTILATION
The fins generate a directional airflow that helps expel grass before it accumulates, even in difficult conditions.
The redesigned fins help move grass clippings before they accumulate under the robot.
Less grass around the fixings helps the blades pivot during cutting.
Its smooth surface limits grass entanglement around the screws and protects the fasteners.
CONSTRUCTION V2
After the success of the V1 in 2025, the V2 combines a rigid main disc with an integrated disc cover. The round, smooth disc cover protects the screws and is designed to slide and slow down upon contact with an obstacle rather than stopping abruptly.
The base of the fins is reinforced.
The corners are heavily rounded.
A rim runs around the edge of the disc.
The ends of the fins are slightly set back.
COMPATIBILITY
This version is for the LUBA Mini only and includes a disc.
The disc retains the robot's original diameter.
The version is available with or without compatible Bosch blades.
This version is not compatible with LUBA 1, LUBA 2, LUBA 2X, or LUBA 3.
INSTALLATION
The Turbine Disc V2 replaces the original disc without any modification to the robot.
Observe the assembly instructions before putting the robot back into service.
FAQ
No. This card is for the specific disk for LUBA Mini. For LUBA 1, LUBA 2, LUBA 2X, or LUBA 3, choose the dedicated LUBA version.
The disk currently on the market retains the original diameter of the LUBA Mini.
No. The disk is installed as a replacement for the original disk, without modifying the robot.
Yes. Airflow and the disc cover are particularly helpful when wet grass sticks to the underside of the deck, increasing clogging or blocking the blades.
The LUBA Mini uses a deck adapted to its compact size. The Turbine Disc V2 was designed for this robot to help clear grass, keep the blades freer, and keep the deck cleaner, especially in dense, wet, or flattened grass.
Additive manufacturing relies on high-end machines and suitable materials, such as impact and heat-resistant ABS. The reinforced design and the round, smooth disc cover limit fouling to reduce maintenance after mowing.
For classic LUBA robots, see LUBA anti-clogging discs. For YUKA and YUKA Mini, find YUKA anti-clogging discs.
Consumables are grouped in the compatible blades and screws collection. Also find LUBA Mini accessories and all LUBA accessories.
